ABOUT
        Sales Linda Tong
        TEL:13925852998
        Fax:0769-85315190
        E-mail:lindachentatming@163.com
        Your present location:HOME >> ABOUT >> Success Stories
        Success Stories

        1. T- die
          A 2 + 2 cavity boxes and boxes cover T- mold on a mold containing T- program CAP32 DP injection molding machine. With a tailor-made mechanical removal hand, the product on the conveyor belt。

         
         
        A side of the mold core B side of the mold core
         
           
         
            2. T- die
          A 16-cavity spoon and knife T- 24 cavity mold production on a mold containing T- program CAP48 DP injection molding machine。
        A knife edge cores B-side of a spoon cavity
         

        3. T- die
          A 4 + 4 cavity mold base and lid T- produced on a mold containing T- program CAP32 DP injection molding machine。

         

        4. stack mold
          A 16-cavity spoon and knife 24 cavity stack mold on a Acc200 injection molding machine。

         
        Ling and stack molds
         

            5. GEFIT die inCAP32 TPOn
          Italy Jiffy special cap mold cavity 32 a test on CAP32 TP injection molding machine.
        Injection cap weight 1.6 grams, and contain anti-theft ring. Period up to 4.4 seconds. Injection molding machine to allow double pump, double pump side mold plastics and shorten the cycle out of the top edge. The oil is a semi-closed loop control.

        GEFIT 32 cavity cap mold Jiffy Mold on CAP 32 TP
        Caps Danfei out
         

        6. Seagate moldCAP48 DPOn
          Seagate's 48-cavity cap mold test on CAP48 DP injection molding machine. In the exhibition environment cycle just over seven seconds, but in the preferred mold cooling conditions can be shorter. No caps theft ring, but does not affect the cycle. No theft ring mold without sliders, so mold narrow, but the most important is to reduce the moving parts of the mold is more reliable。

         

        Caps Danfei out

         

        7. TME110 saving injection molding machine
          Servo motor than the variable pump more power, especially the application of the thick-walled products. This client manufacturing toothbrush. Toothbrush handle is thick. Servo motor power is 11 kW。

        The servo motor is black device

        The controller is gray equipment

        制動電阻
         

        8. TME 150 energy-saving injection molding machine
          Servo motor than the variable pump more power, especially the application of the thick-walled products. Servo motor power is 11 kW。

        The servo motor is a silver device

        The controller device is white

         

        9. thin-walled injection
          A thin-walled container tested on Acc200 small injection molding machine. Coupled with the side edge of the mold plastics, the cycle can reach 3.6 seconds。

         

        10. PP preforms
          PP 32 cavity preform mold produced on PET2100. There are two sets of production equipment in Shandong Province infusion bottle preforms。

         

        11.5 gallons (18.9 liters) Preform
          Thickness of 5 gallons preforms ranging from 8mm to 10mm. To shorten the cooling time, with a high thermal conductivity of beryllium copper mold core. A two-cavity mold can be produced on PET2100-770. Productivity is higher than the 60 per hour。

        铍铜模芯